The interior of the heavy duty solar power kit, with a 6 volt rechargeable battery.
The solar power kit is a robust enclosure with a solar panel to protect and power Davis receivers.

6612 Davis Instruments Heavy Duty Solar Power Kit

$1,000.00 Inc. GST

An enclosure option for remote installations; to power and protect a Weather Envoy

Category:

Description

The Heavy Duty Solar Power Kit allows you to power and shelter your Weather Envoy for remote or field installations.

The kit consists of a solar panel, battery and charging circuit in a protective housing.

Why buy this?
  • You have a remote site with no power or internet and want a cost effective way to gather weather data. Install a sensor suite with a Weather Envoy and USB data logger. Visit periodically to download the data onto your PC lap top.
Notes:
  • Can be used with both the cabled and wireless Weather Envoy
  • This power kit can power the legacy Vantage Vue or Vantage Pro 2 console, but does not have the space to install them. The 6618 Universal Shelter may be used
  • The Heavy Duty Solar Power Kit is required to power cabled consoles and the cabled Weather Envoy, or wherever extra power is needed
  • In low light or poor conditions, you may need the Heavy Duty Solar Power Kit to power wireless consoles or Envoys instead of the 6614 Solar Power Kit normally used
  • Check out the Davis mounting options: 7716 Mounting Tripod or the 7717 Mounting Pole Kit

More information

Features:
  • 5 watt solar panel
  • 12 amp 6 Volt rechargeable battery
  • 3m cable
  • Weather-resistant shelter made of ASA plastic
  • Regulator circuit
  • Battery will charge down to -20 degrees Celsius
  • Operates down to -40 degrees Celsius
  • 34.9 cm x 25.4 cm x 10.6 cm
  • Weighs 3.47 kg
  • Mounts to flat surface or pole
  • Access holes in the floor for cable access into the shelter. Holes come with removable plugs; cables should be routed through holes using Davis rubber grommets
In the box:
  • Shelter with solar panel, charging circuit and 6 volt 12 amp battery
  • Mounting Hardware Kit including U bolts, lag screws, lock washers, hex nuts, backing plates, pan head Philips screws and a split grommet
Not compatible with:
  • WeatherLink Console
  • 6100 WeatherLink Live
  • 6805 EnviroMonitor IP Gateway
  • These require more power than is supplied by the power kit

You may also like…

Related products